- 0086-13656166310
- info@blendpolyol.com
- Mon - Fri: 8:00 - 17:30
Provide wireless possibility for your polyurethane one-stop solution
Menu
Provide wireless possibility for your polyurethane one-stop solution
Unleash the potential of PU Insulation Foam for unbeatable thermal efficiency. Our high-quality materials offer superior insulation, saving energy and maximizing comfort. Upgrade your insulation game with PU Insulation Foam today.
Description
SPC-10062 polyol is a fully formulated polyol blend, especially developed for PU rigid foam insulation, applied with metal face sheet or non-metalic face sheet like Mgo, OSB, etc.
It is water based blowing agent to achieve the foreseen foam density. When SPC-10062 polyol and isocyanate (MDI) are mixed together using suitable equipment, the good flowability of the resulting foam makes it possible to achieve a homogenous foam density throughout the cross section of the panel. Foams which are allowed to cure for a sufficient time in the mould according to the foam thickness show good adhesion to the surface and good dimensional stability.
SPC-1006 polyol contains sufficient amount of fire retardant for the foreseen applications and the foams obtained by using it together with isocyanate (MDI) are classified as B2 or B3 according to DIN 4201 classification. It is recommended that a mould surface temperature of 40℃ is maintained during production.
Specification
| technical parameters | |||
| density： | KG/M³ | ≥42.9 | ≥30 |
| heat conductivity coefficient： | W/M·K | ≤0.02 | ≤0.027 |
| moisture permeance factor | NG/PA.M.S | ≤3.34 | |
| water absorption | G/100M² | ≤0.5 | ≤4 |
| closed porosity | % | ≤97 | ≥90 |
| compressive strength | KPA | ≥220 | ≥150 |
| flexure strength | KN/M² | ≥2450 | ≥1750 |
| oxygen index | ≥28 | ≥26 | |
| Combustion rating | B | ||
| Flame prevalence | ≯15 | ≯25 | |
| Vertical burning method | burning time | ≤7.96 | ≤30 |
| combustion flame height | ≤15 | ≤250 | |
| Stability | ≤1% | ≤1% | |
First Aid For Eyes & Skin
When working, please avoid contact of polyol with eyes or skin. Safety glasses are suggested. Skin contaminated with polyols should be washed with soap and plenty of water. If polyol contacts eyes, flush with plenty of low pressure flowing water or get medical attention.
Please complete the form below and our customer support team will be in touch with you shortly. Inquiries submitted through this form will receive priority processing over emails.